877-474-7774
Home > Networking > Cisco Systems > Cisco Cards and Adapters > Cisco EtherSwitch 4 Port Switch HWIC-4ESW
Cisco EtherSwitch 4 Port Switch HWIC-4ESW
BRAND NEW FACTORY SEALED & RETAIL BOXED
Cisco EtherSwitch HWICs are 10/100BaseT Layer 2 Ethernet switches with Layer 3 routing capability. (Layer 3 routing is forwarded to the host, and is not actually performed at the switch.). Traffic between different VLANs on a switch is routed through the router platform. Any one port on a Cisco EtherSwitch HWIC may be configured as a stacking port to link to another Cisco EtherSwitch HWIC or EtherSwitch network module in the same system. An optional power module can also be added to provide inline power for IP telephones.
Cabling Type : Ethernet 100Base-TX , Ethernet 10Base-T
Communication Mode : Full-duplex , Half-duplex
Compliant Standards : IEEE 802.1D , IEEE 802.1p , IEEE 802.1Q , IEEE 802.1x , IEEE 802.3 , IEEE 802.3u , IEEE 802.3x
Data Link Protocol : Ethernet , Fast Ethernet
Data Transfer Rate : 100 Mbps
Features : Auto-negotiation , Auto-sensing per device , Auto-uplink (auto MDI/MDI-X) , Flow control , Full duplex capability , Layer 2 switching , Trunking , VLAN support
Form Factor : Plug-in module
Ports Qty : 4
Remote Management Protocol : SNMP 1 , SNMP 2 , SNMP 3 , Telnet
Cisco EtherSwitch HWICs are 10/100BaseT Layer 2 Ethernet switches with Layer 3 routing capability. (Layer 3 routing is forwarded to the host, and is not actually performed at the switch.). Traffic between different VLANs on a switch is routed through the router platform. Any one port on a Cisco EtherSwitch HWIC may be configured as a stacking port to link to another Cisco EtherSwitch HWIC or EtherSwitch network module in the same system. An optional power module can also be added to provide inline power for IP telephones.
Cabling Type : Ethernet 100Base-TX , Ethernet 10Base-T
Communication Mode : Full-duplex , Half-duplex
Compliant Standards : IEEE 802.1D , IEEE 802.1p , IEEE 802.1Q , IEEE 802.1x , IEEE 802.3 , IEEE 802.3u , IEEE 802.3x
Data Link Protocol : Ethernet , Fast Ethernet
Data Transfer Rate : 100 Mbps
Features : Auto-negotiation , Auto-sensing per device , Auto-uplink (auto MDI/MDI-X) , Flow control , Full duplex capability , Layer 2 switching , Trunking , VLAN support
Form Factor : Plug-in module
Ports Qty : 4
Remote Management Protocol : SNMP 1 , SNMP 2 , SNMP 3 , Telnet
"We found Chicago Computer Supply after a bad experience with another online merchant. We have been extremely pleased with the products we've ordered and their customer support is excellent."
