BRAND NEW FACTORY SEALED & RETAIL BOXED WITH THE FULL CISCO WARRANTY!!!
The Cisco Catalyst 3850 Series is the next generation of enterprise-class stackable Ethernet and Multigigabit Ethernet access and aggregation layer switches that provide full convergence between wired and wireless on a single platform. Cisco's new Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility and application optimization. This convergence is built on the resilience of the new and improved Cisco StackWise-480 technology. The Cisco Catalyst 3850 Series Switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), Cisco Universal Power over Ethernet (Cisco UPOE), modular and field-replaceable network modules, RJ45 and fiber-based downlink interfaces, and redundant fans and power supplies. With speeds that reach 10Gbps, the Cisco Catalyst 3850 Multigigabit Ethernet Switches support current and next-generation wireless speeds and standards (including 802.11ac Wave 2) on existing cabling infrastructure.
Specifications
- Manufacturer: Cisco Systems
- Brand: Cisco
- Product Line: Cisco Catalyst
- Model: 3850-12X48U-S
- Packaged Quantity: 1
- RAM
- Installed Size: 4 GB, 4 GB, 4 GB, 4 GB
- Flash Memory
- Installed Size: 2 GB, 2 GB, 2 GB, 2 GB
- Performance
- Performance: Stacking bandwidth: 480 Gbps, Forwarding performance (64-byte packet size): 460 Mpps, Switching capacity: 176 Gbps
- Capacity
- Capacity: NetFlow entries: 48000, IPv4 routes: 24000, Switched virtual interfaces (SVIs): 1000
- Networking
- Type: Switch
- Subcategory: Network hubs and switches
- Subtype: Gigabit Ethernet
- Form Factor: Rack-mountable, Desktop
- Stackable: Stackable
- Ports Qty: 48
- Advanced Switching: Layer 3
- Routing Protocol: RIP-2, EIGRP, RIPng, RIP-1
- MAC Address Table Size: 32000 entries
- Jumbo Frame Support: 9198 bytes
- Manageable: Yes
- Remote Management Protocol: RMON 1, SNMP 2c, SSH, RMON 2, SNMP 3, SNMP 1, Telnet, CLI
- Power Over Ethernet (PoE): UPOE
- PoE Budget: 630 watt
- Status Indicators: Port transmission speed, System, Port duplex mode, Status, PoE
- Qty: 48
- Type: 10/100/1000 (UPOE)
- Expansion Slots
- Expansion Slots: 1 (total) / 1 (free) x expansion slot
- Type: Cisco IOS IP Base
- Power Device
- Type: Internal power supply
- Power Redundancy: Optional
- Power Redundancy Scheme: 1+1 (with optional power supply)
- Installed Qty: 1
- Max Supported Qty: 2
- Power Provided: 1100 watt
- Nominal Voltage: AC 120/230 V
- Frequency Required: 50/60 hertz
- Miscellaneous
- Color Category: Gray
- Height (Rack Units): 1
- Authentication Method: RADIUS, TACACS+, Kerberos, Secure Shell (SSH)
- MTBF: 202,030 Hours
- Width: 17.5 inch
- Depth: 19.2 inch
- Height: 1.8 inch