Cisco Genuine GLC-TE= 1000BASE-T SFP Copper RJ45

CISCO GENUINE. BRAND NEW. FACTORY SEALED. FULL CISCO WARRANTY. FROM CHICAGO COMPUTER SUPPLY

Overview

Not every network connection needs fiber. In many enterprise environments, copper still powers the majority of access-layer links and short uplinks. The Cisco GLC-TE= gives you a clean way to run 1G Gigabit Ethernet over copper using an RJ-45 SFP transceiver.

This module supports 1000Base-T and plugs directly into compatible SFP ports, helping you connect to existing copper infrastructure without changing your switch platform. It’s also hot-swappable, so installation stays fast and downtime stays minimal.

If you want a genuine Cisco copper SFP that keeps your network flexible and simple, this optic fits perfectly.

Key Features

·         Supports 1G Gigabit Ethernet connectivity over copper cabling

·         Designed for 1000Base-T RJ-45 Ethernet networks

·         Hot-swappable SFP module for quick installation and replacement

·         Plug-in form factor supports easy upgrades without hardware changes

·         Ideal for wiring closets, access switching, and copper uplinks

·         Allows mixing with fiber SFP types on a port-by-port basis

·         Reliable Cisco option for stable copper connectivity

·         Cisco genuine module supplied new with full warranty coverage

Technical Specifications

Description: Cisco Genuine GLC-TE= 1000BASE-T SFP Copper RJ45
Device Type: SFP (mini-GBIC) Transceiver Module
Connectivity Technology: Wired
Network Standard: 1000Base-T
Interface / Connector: RJ-45 (Copper Ethernet)
Data Link Protocol: Gigabit Ethernet
Data Transfer Rate: 1 Gbps
Form Factor: Plug-in Module
Cisco Part Number: GLC-TE=
UPC: 792285538414

Use Cases

The Cisco GLC-TE= is ideal for organizations that need reliable 1G copper Ethernet connectivity when using SFP ports on Cisco equipment. It works well for access-layer deployments, patch panel connections, wiring closets, and short-range uplinks where RJ-45 cabling already exists. If you want to keep your network flexible by mixing copper and fiber connections across different ports, this module is a practical choice.

Why Choose the GLC-TE=

·         Genuine Cisco copper SFP for 1000Base-T networking

·         RJ-45 interface works with existing Ethernet cabling

·         Hot-swappable design supports quick replacement and upgrades

·         Ideal for enterprise switching and wiring closet environments

·         Helps reduce cost and complexity when fiber is unnecessary

·         Supports flexible port-by-port deployments with other SFP types

·         Cisco genuine module supplied brand new and factory sealed

·         Backed by a full Cisco warranty for confident deployment

FAQs

What is the Cisco GLC-TE= used for?

The Cisco GLC-TE= provides 1G Gigabit Ethernet connectivity over copper via an RJ-45 1000Base-T interface on an SFP port.

Is the GLC-TE= a fiber optic module?

No. The GLC-TE= is a copper SFP transceiver designed for RJ-45 Ethernet cabling, not fiber.

What speed does the Cisco GLC-TE= support?

It supports 1 Gbps (Gigabit Ethernet), which is best for enterprise access switching and short-range uplinks.

What connector type does the GLC-TE= use?

It uses an RJ-45 connector, allowing direct connection to standard copper Ethernet infrastructure.

Is the Cisco GLC-TE= hot-swappable?

Yes. It is a hot-swappable SFP module so that you can install or replace it quickly on supported devices.

Can I mix GLC-TE= fiber SFP modules with other fiber SFP modules on the same switch?

Yes. Cisco SFPs can often be mixed per port so that you can run copper on one port and fiber-optic SFPs like SX, LX/LH, or ZX on another, depending on your design.

Where is the GLC-TE= commonly used?

It works best in wiring closets, access-layer switching, and enterprise environments with copper cabling.

Is this product new and covered under warranty?

Yes. This module is Cisco genuine, brand-new, factory-sealed, and includes the full Cisco warranty from Chicago Computer Supply.