349239-B21 | HP 250GB SATA 7.2K RPM 3.5-inch Hot-Plug HDD

BRAND NEW WITH FULL HP WARRANTY!!!

Overview

The HP 250GB 1.5Gb/s SATA 7,200 RPM 3.5-inch Hot-Plug Hard Drive (349239-B21) is an enterprise server storage drive designed for compatible HP ProLiant server platforms. It provides 250GB of storage capacity, a Serial ATA interface, and 7,200 RPM rotational speed for general-purpose storage requirements in supported legacy server environments.

Featuring a 3.5-inch Large Form Factor (LFF), this drive is designed for compatible server drive bays. Its SATA interface supports storage configurations that require a 1.5Gb/s interface, making it suitable for maintaining older server infrastructure where this capacity and interface remain compatible with the installed hardware.

For IT departments and infrastructure maintenance teams, the 349239-B21 provides a replacement storage option for supported HP ProLiant systems. Before purchasing, verify the server model, controller, drive carrier, and hot-plug support to ensure compatibility.

Key Features – HP 349239-B21

• Storage Capacity: 250GB
• Drive Type: Hard disk drive (HDD)
• Interface: Serial ATA (SATA)
• Interface Transfer Rate: 1.5Gb/s
• Rotational Speed: 7,200 RPM
• Form Factor: 3.5-inch Large Form Factor (LFF)
• Installation: Hot-plug in compatible configurations
• SMART Support: Supported
• Target Platform: Compatible HP ProLiant servers and supported storage systems

Technical Specifications

• Manufacturer: HP
• Manufacturer Part Number (MPN): 349239-B21
• Storage Capacity: 250GB
• Storage Interface: SATA
• Interface Transfer Rate: 1.5Gb/s
• Rotational Speed: 7,200 RPM
• Average Seek Time: 11ms
• Full-Stroke Seek Time: 22ms
• Bytes per Sector: 512
• Drive Form Factor: 3.5-inch LFF
• Hot-Plug Support: Supported in compatible server configurations
• RAID Support: Depends on the installed SATA controller and supported RAID configuration
• Operating System Compatibility: Depends on the host server and storage controller
• Compatible Platforms: Selected legacy HP ProLiant servers; verify the exact server model before ordering

Physical Specifications

• Form Factor: 3.5-inch LFF
• Weight:
  • 0.50 kg
  • 1.10 lbs
• Dimensions:
  • 110.7 × 188.7 × 26.4 mm
  • 4.36 × 7.43 × 1.04 inches
• Rack Compatibility: Installs inside a compatible server drive bay; it does not occupy a separate rack unit.

Ideal For

• Replacing a failed SATA hard drive in a compatible HP ProLiant server.
• Maintaining legacy business applications hosted on older server hardware.
• Supporting general-purpose storage requirements in compatible server environments.
• Maintaining spare-parts inventories for legacy HP server deployments.
• Extending the service life of supported server infrastructure.

Warranty & Support

• Standard Manufacturer Warranty: HP documentation identifies a one-year warranty for this SATA drive category. Confirm the warranty applicable to the specific unit and seller before purchase.
• Support Contract Compatibility: HP Care Pack eligibility depends on the host system, product condition, and applicable support terms.
• Installation Recommendation: Confirm the server model, SATA controller, drive-bay format, and hot-plug support before installation.

FAQs – HP 349239-B21

1. What is the storage capacity of the HP 349239-B21?
It provides 250GB of storage capacity.

2. What interface and rotational speed does this drive use?
It uses a 1.5Gb/s SATA interface and operates at 7,200 RPM.

3. Is this drive hot-swappable?
The drive is listed as hot-plug compatible, but actual hot-plug operation depends on the server, controller, and drive-bay configuration.

4. Will it work in every HP ProLiant server?
No. Compatibility depends on the server generation, controller, drive bay, and firmware. Check the server's QuickSpecs before purchasing.

5. Can this drive be used in a RAID array?
It may be used with a compatible SATA RAID controller if the controller supports the drive and intended RAID configuration.

6. What are the physical dimensions and weight?
The listed dimensions are 110.7 × 188.7 × 26.4mm (4.36 × 7.43 × 1.04 inches). A distributor lists the weight as 0.50kg (1.10lbs); verify whether this is the bare drive or complete assembly before treating it as the exact product weight.