D9419A – HP 36.4GB Ultra3 SCSI 10K RPM Low-Profile Hot-Swap Hard Drive

BRAND NEW WITH FULL HP WARRANTY!!! 

Overview

The D9419A HP 36.4GB Ultra3 SCSI 10K RPM Low-Profile Hot-Swap Hard Drive is a legacy enterprise storage module designed for compatible HP NetServer and HP Rack Storage/12 environments. It provides 36.4GB of capacity, a 10,000 RPM rotational speed, and an Ultra3 SCSI interface for supported legacy server and storage configurations.

This low-profile drive module is intended for organizations maintaining established HP infrastructure, replacing failed drives, or restoring older business systems. Its hot-swap module design supports drive replacement in compatible enclosures designed for hot-swappable storage, helping simplify maintenance when the host system supports the procedure.

Because the D9419A belongs to an older storage generation, compatibility is essential. Verify the server or storage enclosure model, SCSI controller, drive carrier, and supported configuration before ordering. It is primarily suited to legacy-system maintenance rather than new storage deployments.

Key Features – HP D9419A

• Processor: Not applicable; this is a hard disk drive.
• Memory: Not applicable.
• Storage: 36.4GB capacity.
• Controller: Requires a compatible Ultra3 SCSI controller.
• Networking / Ports: Ultra3 SCSI storage interface; no Ethernet connectivity.
• Power & Cooling: Powered and cooled through a compatible server or storage drive enclosure.
• Management: Drive monitoring depends on the host system and supported SCSI controller.
• Security: Hardware encryption is not verified for this SKU.
• Form Factor: Low-profile hot-swap hard drive module.

Technical Specifications

• Processor Type: Not applicable.
• Chipset / Platform: Compatible legacy HP NetServer and HP Rack Storage/12 platforms.
• Memory Technology: Not applicable.
• Storage Interface: Ultra3 SCSI.
• RAID Support: Depends on the installed compatible SCSI RAID controller and supported configuration.
• Expansion Slots: Not applicable; installs in a compatible drive bay.
• Networking: No Ethernet interface.
• I/O Ports: SCSI drive connection; exact connector details should be confirmed for the supplied module.
• Operating System Compatibility: Depends on the host server, SCSI controller, drivers, and operating system.

Physical Specifications

• Form Factor: Low-profile hot-swap hard drive module.
• Weight:
  • 0.7 kg
  • 1.6 lbs
• Dimensions:
  • 25.4  x 101.6  x 146.0 mm 
  • 1.00  x 4.00  x 5.75 inches 
• Rack Compatibility: No direct rack mounting; installs in a compatible server or storage enclosure.

Ideal For

• Maintaining legacy HP NetServer infrastructure.
• Replacing a failed drive in a compatible HP storage enclosure.
• Supporting older business applications that depend on legacy hardware.
• Maintaining compatible HP Rack Storage/12 configurations.
• Restoring older server environments where a complete hardware migration is not yet possible.

Warranty & Support

• Standard Manufacturer Warranty: Confirm the warranty applicable to the specific unit with Chicago Computer Supply. This legacy product may be sold under different condition and warranty terms.
• Support Contract Compatibility: Eligibility depends on the installed system, existing HP/HPE support entitlement, and the supplied drive's status. Confirm coverage with the seller or HPE before purchase.

FAQs – HP D9419A

1. What is the storage capacity of the D9419A?
The D9419A provides 36.4GB of storage capacity.

2. What is the drive's rotational speed?
It operates at 10,000 RPM and uses an Ultra3 SCSI interface.

3. Is the D9419A hot-swappable?
It is listed as a hot-swap drive module. Hot-swap replacement must be supported by the installed server or storage enclosure and performed according to its maintenance procedures.

4. Can I use this drive with a modern SAS or SATA controller?
Direct compatibility should not be assumed. Ultra3 SCSI is a different interface from SAS and SATA.

5. Can this drive be used in a RAID array?
It may be used in supported legacy RAID configurations when the controller and system support the drive. Confirm drive compatibility and array requirements before replacement.

6. What should I check before ordering?
Verify the exact HP server or enclosure model, drive carrier, SCSI interface, product condition, physical dimensions, and warranty terms with the seller.