S6X51A#ABA HPE Networking Comware 5150L 24p 10M/100M/1G PoE+ 4p SFP 1G Combo 4p SFP+ 1G/10G 405W Switch

BRAND NEW WITH FULL HPE WARRANTY!!!

Overview

S6X51A#ABA HPE Networking Comware 5150L 24p 10M/100M/1G PoE+ 4p SFP 1G Combo 4p SFP+ 1G/10G 405W Switch is a fully managed Layer 3 access switch designed for enterprise branch offices, SMB networks, wireless infrastructure, IP telephony, surveillance, and other PoE-intensive deployments. The model provides 24 × 10/100/1000BASE-T PoE+ ports, four 100/1000BASE-X SFP combo ports, and four 1G/10G SFP+ uplinks. HPE specifies 128 Gbps switching capacity and 95.2 Mpps forwarding performance for this model.

BRAND NEW WITH FULL HPE WARRANTY!!! The switch combines a 405W PoE budget with Class 4 PoE support, allowing connected access points, IP phones, cameras, and IoT devices to receive network connectivity and power from the same infrastructure. Fast PoE, Perpetual PoE, PoE watchdog, IPv4/IPv6 capabilities, and up to nine-member IRF stacking provide a practical platform for resilient access-layer deployments.

The 1U rack-mountable design fits standard 19-inch EIA racks and includes management through Web GUI, CLI, SmartMC, HPE Intelligent Management Center, HPE Aruba Networking AirWave, SNMP, and REST API.

Key Features – S6X51A#ABA HPE Networking Comware 5150L

• Processor: ARM 1.2 GHz dual-core CPU
• Memory: 1 GB SDRAM
• Flash: 512 MB Flash
• Switching Capacity: 128 Gbps
• Forwarding Performance: 95.2 Mpps
• Networking / Ports:
  • 24 × 10/100/1000BASE-T PoE+
  • 4 × 100/1000BASE-X SFP combo ports
  • 4 × 1G/10GBASE-X SFP+ ports
• PoE: 405W Class 4 PoE+ budget
• PoE Features: Fast PoE, Perpetual PoE, PoE Watchdog
• Management: Web GUI, CLI, SmartMC, HPE IMC, HPE Aruba Networking AirWave, SNMP, REST API
• Stacking: Up to 9 switches using Intelligent Resilient Fabric (IRF)
• Security: ACLs, secure boot, 802.1X, RADIUS, TACACS+, SSHv2, SSL, SNMPv3, TLS, ARP/DHCP protection
• Form Factor: 1U rack-mountable switch

Technical Specifications

• Processor Type: ARM 1.2 GHz dual-core
• Chipset / Platform: HPE Networking CW 2150 / Comware platform
• Memory Technology: 1 GB SDRAM
• Flash Memory: 512 MB
• Storage Interface: Not applicable; fixed Ethernet switch architecture
• RAID Support: Not applicable
• Expansion Slots: No internal expansion slots; fixed-port configuration
• Networking:
  • 24 × 10/100/1000BASE-T PoE+
  • 4 × 100/1000BASE-X SFP combo
  • 4 × 1G/10GBASE-X SFP+
• Switching Capacity: 128 Gbps
• Throughput: 95.2 Mpps
• Latency: <5 µs at 1GbE; <3 µs at 10GbE
• MAC Address Table: 16K entries
• IPv4 Routes: 1,500
• IPv6 Routes: 512
• Jumbo Frames: Up to 9000 bytes
• Routing: Policy-Based Routing (PBR), RIP and related Layer 3 capabilities
• I/O Ports:
  • 1 × RJ45 console
  • 1 × USB Type-C console
  • 1 × out-of-band management port
• Operating System / Network Software: HPE Comware
• Stacking: Up to 9-member IRF stack

Physical Specifications

• Form Factor: 1U rack-mountable
• Weight:
  • ≤ 3.6 kg
  • ≤ 7.94 lbs
• Dimensions:
  • 440 × 260 × 44 mm (W × D × H)
  • 17.32 × 10.24 × 1.73 inches
• Rack Compatibility: EIA standard 19-inch telco rack or equipment cabinet; rack hardware included.

Important specification note: HPE's official datasheet publishes the physical weight as ≤3.6 kg, rather than an exact measured shipping/product weight. Therefore, 3.6 kg / 7.94 lbs should be treated as the manufacturer's published maximum, not an invented exact weight. Some third-party retailers list 4.95 kg, but that conflicts with HPE's official physical specification, so the HPE figure is the appropriate value for the CCS product page.

Ideal For

• Enterprise branch-office access networks
• SMB network infrastructure
• Wireless access point deployments
• IP phone and VoIP networks
• IP surveillance and CCTV deployments
• IoT device connectivity
• PoE-powered access-layer environments
• Campus and departmental networks
• Organizations requiring 10GbE uplinks
• Networks requiring switch stacking and Layer 3 capabilities

Warranty & Support

• Standard Manufacturer Warranty: HPE Limited Lifetime Warranty.
• Support: Compatible with HPE networking service and support offerings available for the CW 2150 platform.
• Power Configuration: Fixed internal power supply; this model does not provide dual hot-swappable PSU redundancy.

FAQs – S6X51A#ABA HPE Networking Comware 5150L

1. Can the S6X51A#ABA be upgraded with additional network ports?
No. The switch uses a fixed-port architecture. It provides 24 PoE+ copper ports, four SFP combo ports, and four 1G/10G SFP+ ports as specified by HPE.

2. How much PoE power does the S6X51A#ABA provide?
The switch provides a 405W PoE budget and supports Class 4 PoE with up to 30W per PoE port under the supported PoE standard.

3. Can multiple S6X51A#ABA switches be stacked?
Yes. HPE's Intelligent Resilient Fabric technology supports an IRF stack of up to nine switches, allowing multiple physical switches to operate as a resilient logical switching fabric.

4. How is the switch managed?
Administrators can manage the switch through its Web GUI, CLI, Smart Management Center (SmartMC), HPE Intelligent Management Center, HPE Aruba Networking AirWave, SNMP manager, and REST API.

5. Does the S6X51A#ABA support redundant power supplies?
No. This specific model has a fixed internal power supply, so it does not offer the dual hot-swappable PSU redundancy found on higher-end switch platforms.

6. Is the S6X51A#ABA suitable for a standard server rack?
Yes. It is a 1U rack-mountable switch designed for an EIA standard 19-inch telco rack or equipment cabinet.