S6X55A#ABA HPE Networking Comware 2150 16p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 248W Switch

BRAND NEW WITH FULL HPE WARRANTY!!!

Overview

S6X55A#ABA HPE Networking Comware 2150 16p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 248W Switch is a fully managed Layer 3 enterprise network switch designed for small and midsize business networks and branch-office deployments. It provides 16 Gigabit Ethernet PoE+ ports for connecting and powering network devices, together with four 1G/10G SFP+ ports for high-speed uplinks and stacking. HPE specifies up to 176 Gbps forwarding capacity and 83.3 Mpps throughput for this model.

Built for organizations that need centralized network management without moving to a larger chassis platform, the CW 2150 combines Layer 3 routing, QoS, IPv4/IPv6 capabilities, IRF stacking, and a 248W PoE+ budget. Its 1U rack-mountable design fits standard 19-inch equipment racks, making it suitable for access-layer deployments, branch offices, SMB infrastructure, IP phones, wireless access points, surveillance devices, and other PoE-powered endpoints.

Key Features – S6X55A#ABA HPE Networking Comware 2150 16p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 248W Switch

• Processor: ARM 1.2 GHz dual-core
• Memory: 1 GB SDRAM
• Flash: 512 MB
• Storage: 512 MB Flash
• Networking / Ports: 16 × 10/100/1000BASE-T PoE+; 4 × 1G/10G SFP+
• PoE Budget: 248 W
• Switching / Forwarding Capacity: 176 Gbps
• Throughput: 83.3 Mpps
• Latency: <5 µs at 1GbE; <3 µs at 10GbE
• Management: CLI, Web management, SNMP, out-of-band management, HPE Intelligent Management Center
• Stacking: IRF stacking for up to 9 switches
• Form Factor: 1U rack-mountable
• Power: Fixed internal AC power supply
• Cooling: One fan according to published distributor specifications; fixed-power design.

Technical Specifications

• Processor Type: ARM 1.2 GHz dual-core
• Chipset / Platform: HPE Networking CW 2150 / Comware
• Memory Technology: 1 GB SDRAM
• Flash Memory: 512 MB
• Packet Buffer: 1.5 MB
• Storage Interface: Not applicable; fixed 512 MB Flash for switch software/system storage
• RAID Support: Not applicable
• Expansion Slots: 4 × 1G/10G SFP+ ports for uplink/stacking connectivity
• Networking:
  • 16 × 10/100/1000BASE-T PoE+
  • 4 × 1G/10GBASE-X SFP+
  • 176 Gbps forwarding capacity
  • 83.3 Mpps throughput
  • 16K MAC address table
  • 1,500 IPv4 routes
  • 512 IPv6 routes
  • 32 VRF instances
  • 32 switched virtual interfaces
• I/O Ports:
  • 1 × RJ-45 console
  • 1 × USB Type-C console
  • 1 × RJ-45 out-of-band management
• PoE: IEEE 802.3at PoE+; 248W PoE budget
• Routing: IPv4/IPv6 Layer 3 routing, including RIP and policy-based routing
• Management: CLI, Web browser, SNMP 1/2c/3, REST API, HPE Intelligent Management Center
• Security / Network Controls: ACL, 802.1X, VLAN, RADIUS, HWTACACS, QoS and access-control features
• Jumbo Frames: Up to 9000 bytes
• Stacking: IRF technology, up to 9 switches
• Operating Environment: -5°C to 50°C operating temperature; 5%–95% non-condensing operating humidity.

Physical Specifications

• Form Factor: 1U rack-mountable
• Weight:
  • 3.6 kg
  • 7.94 lbs
• Dimensions (W × D × H):
  • 440 × 260 × 44 mm
  • 17.32 × 10.24 × 1.73 inches
• Rack Compatibility: Standard 19-inch EIA rack or equipment cabinet; rack-mounting hardware included.

Ideal For

• SMB and mid-market network infrastructure
• Branch-office access-layer deployments
• Managed Ethernet access networks
• IP phone deployments requiring PoE+
• Wireless access-point connectivity
• IP surveillance and security-camera networks
• Network-connected IoT and edge devices
• Organizations requiring Layer 3 routing at the access layer
• Deployments requiring 1G/10G uplinks
• Networks requiring IRF switch stacking and centralized management

Warranty & Support

• Standard Manufacturer Warranty: Limited lifetime warranty is listed for the S6X55A#ABA by enterprise resellers.
• Support Compatibility: HPE Networking support and service offerings can be used to extend operational support and service coverage according to the applicable HPE service contract.
• Management Support: HPE Intelligent Management Center, CLI, Web management and SNMP-based management are supported.

FAQs – S6X55A#ABA HPE Networking Comware 2150 16p 248W Switch

1. How many PoE+ devices can the S6X55A#ABA support?
The switch has 16 × 10/100/1000BASE-T PoE+ ports with a total 248W PoE budget. The number of simultaneously powered devices depends on their individual PoE consumption.

2. Does the S6X55A#ABA support 10GbE uplinks?
Yes. It provides four 1G/10G SFP+ ports, which can be used for high-speed uplinks and IRF stacking.

3. Can multiple S6X55A#ABA switches be stacked?
Yes. The CW 2150 platform supports IRF stacking with up to 9 switches, allowing multiple units to operate as a coordinated switching infrastructure.

4. Is this switch suitable for a 19-inch server rack?
Yes. The S6X55A#ABA is a 1U rack-mountable switch measuring 440 × 260 × 44 mm and is designed for standard 19-inch rack or equipment-cabinet installation.

5. Does the switch provide Layer 3 networking?
Yes. It is a managed Layer 3 switch supporting IPv4/IPv6 routing, VLANs, ACLs, VRF, QoS and other enterprise networking functions.

6. What type of management interfaces are available?
Management options include CLI, Web management, SNMP, REST API and out-of-band management, with HPE Intelligent Management Center also supported.