REFURBISHED WITH A 90 DAY CCS WARRANTY!!!
The Prosafe 48-Port Stackable Gigabit PoE L2+ Managed Switch from NETGEAR allows for the most flexible and easy-to-deploy Gigabit Power over Ethernet infrastructure. All 48 ports are 10/100/1000 Mbps and support the 802.3af PoE standards with a comfortable total budget of 384W. The first 8 ports support high power 802.3at PoE+, with up to 30 Watts per port. Four (SFP) Gigabit interfaces provide optional fiber connectivity for longer reach Gigabit Ethernet requirements. Two built-in 10 Gigabit Ethernet SFP+ ports on the front are reserved for network uplinks or servers as well as storage devices. The two 10 Gigabit module bays on the rear permit both uplinks and local/distant stacking and provide versatile 10 Gigabit deployment possibilities.
- MAC Address Table Size: 8,000
- VLANs: 1,024
- 48 port Gigabit PoE / PoE+ with comfortable 384 Watts PoE budget
- 2 built-in 10 Gigabit SFP+ ports and 2 additional module bays for stacking / uplink
- Full set of Layer 2 management features, as well as Layer 2+ (Layer 3 lite IPv4 routing) with unsurpassed affordability
- Versatile deployment with non-PoE Layer 3 GSM7328S/GSM7352S/GSM7328FS switches
- 24 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T
- Four slots are gigabit interface converters (SFP) for SFP modules
- Two slots are 10 gigabit interfaces for SFP+ modules
- Ports 18 support IEEE802.3 at and af, ports 924 support IEEE802.3af Alternative A (MDI-X)
- Two I/O module bays for either 10-Gigabit Ethernet or 24-Gigabit stacking connectivity
- RS-232 console port
- 10/100/1000 buffer memory: Max support 1.5-MB buffer memory
- Bandwidth: 184 Gbps
- VLAN routing
- Port routing
- RIP v1, v2
- OSPF v2, v3
- VRRP
- ACL
- DiffServ QOS
- DHCP, BOOTP Relay
- DHCP server
- IGMP v2, v3
- PIM
- PIM (IPv6)
- MLD v1, v2
- DVMRP
- IPv6 routing
- 802.1Q Static VLAN (Up to 4k)
- 802.1p Class of Service (CoS)
- 802.1D Spanning Tree Protocol (STP)
- 802.1w Rapid Spanning Tree Protocol (RSTP)
- 802.1s Multiple Spanning Tree Protocol (MSTP)
- 802.3ad Link Aggregation (LACP)