BRAND NEW FACTORY SEALED & RETAIL BOXED WITH THE FULL HPE WARRANTY!!!
The Cisco Fabric Extender for HP BladeSystem (Model B22HP) provides an extension of the Cisco Nexus switch fabric to the HP server edge. Logically, it behaves like a remote line card to a parent Cisco Nexus 5000 series switch, with the Fabric Extender and the parent Nexus together forming a distributed modular system. The Cisco Fabric Extender for HP BladeSystem forwards traffic to the parent Cisco Nexus switch over eight 10 Gigabit Ethernet uplinks. Low-cost uplink connections up to 10 meters can be made with copper Twin-ax cable, and longer connections up to 100 meters can use optional Fabric Extender Transceivers. Standard 10Gb SFP+ optics are also supported.
Specifications
-
Capacity
- ACL entries
- 256
-
Expansion Slots
- SFP+
-
Environmental Parameters
- 10 - 95% (non-condensing)
- 104 °F
- 50 °F
-
Header
- Cisco
- PC
- Hewlett-Packard
- B22HP
- 1
- Cisco
-
Interface Provided
- Backplane
- 10Gb Ethernet / Fibre Channel over Ethernet (FCoE)
- 16
- Network
- 10Gb Ethernet / FCoE
-
Miscellaneous
- AS/NZS 3548 Class A, BSMI Class A, CB, CISPR 22 Class A, CSA C22.2 No. 60950-1, EN55022 Class A, FCC Part 15 A, IEC 60950-1, KCC Class A, UL 60950-1, VCCI Class A ITE, WEEE
-
Networking
- 8 x SFP+ (uplink)
- IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3ae, IEEE 802.3ap, IEEE 802.3x
- Wired
- 10 Gigabit Ethernet, Fibre Channel over Ethernet (FCoE), Gigabit Ethernet
- 10 Gbps
- Access Control List (ACL) support, Auto-negotiation, Flow control, Jumbo Frames support, Quality of Service (QoS), Syslog support, VLAN support, Weighted Round Robin (WRR) queuing
- Plug-in module
- iSCSI
- 16
- CLI, RMON, SNMP 1, SNMP 2, SNMP 3
- Port status
- Expansion module
-
Power Device
- 70 Watt
-
Slot Provided
- 8
- 8
-
Slot Required
- 1
- Expansion slot
-
Dimensions & Weight
- 3.7 in
- 1.1 in
- 2.8 lbs
- 10.6 in